Multiple Gun Unloader

Equipment Type Pressure Washer
Inlet 1/2" FPT
Outlet 1/2" FPT
Color Red Spring
PSI 2400
Repair Kits: Barens Order #3527 & #3740
HEAVY DUTY UNLOADERS Pressure actuated unloader. Ideal for multiple gun situation. Side port connections ideal for pressure switch, gauge or pop-off installation. Corrosion and erosion resistant design
Bypass Port: 1/2" FPT
Model 22912A
Gallons Per Minute 13
Weight 2.75 lbs
Temperature 160°F

Equipment Type Pressure Washer
Inlet 1/2" FPT
Outlet 1/2" FPT
Color Orange Spring
PSI 3500
Repair Kits: Barens Order #3527 & #3740
HEAVY DUTY UNLOADERS Pressure actuated unloader. Ideal for multiple gun situation. Side port connections ideal for pressure switch, gauge or pop-off installation. Corrosion and erosion resistant design
Bypass Port: 1/2" FPT
Model 22913A
Gallons Per Minute 13
Weight 2.75 lbs
Temperature 160°F

Equipment Type Pressure Washer

Equipment Type Pressure Washer
Inlet 1/2" FPT
Outlet 1/2" FPT
PSI 1400
Bypass Port: 1/2" FPT
Repair Kits: Barens Order #3527 & #3740
HEAVY DUTY UNLOADERS Pressure actuated unloader. Ideal for multiple gun situation. Side port connections ideal for pressure switch, gauge or pop-off installation. Corrosion and erosion resistant design
Model 22911A
Gallons Per Minute 13
Temperature 160°F
Weight 2.75 lbs

Equipment Type Pressure Washer
Repair kit includes the following Giant parts: 1 each of 12004 cap o-ring; 4 each of 12017 valve stem o-ring; 1 each of 04006 cup (23mm); 1 each of 04018 back up ring (23mm); 2 each of 12092 retainer outlet valve o-ring; 1 each of 12094 outlet valve o-ring; 1 each of 11507 o-ring; and 2 each of 11508 back-up ring.

Equipment Type Pressure Washer
Kit includes one each of Giant Part numbers: (12089) 9/16 440c ball; (12090) outlet spring, & (12095) Bypass seat.

Equipment Type Pressure Washer
Model 22971C
Gallons Per Minute 35.7
Inlet 3/4" FPT
Outlet 3/4" FPT
Color Yellow Spring
PSI 1740
Bypass Port: 3/4" FPT
HEAVY DUTY UNLOADERS Pressure actuated unloader. Ideal for multiple gun situation. Side port connections ideal for pressure switch, gauge or pop-off installation. Corrosion and erosion resistant design
Temperature 160°F
Weight 2.75 lbs

Equipment Type Pressure Washer
Inlet 1/2" FPT
Outlet 3/8" MPT
Dual Bypass 3/8" FPT
Pressure actuated To be used in situations where two spray guns need to be operated at the same time. Pressure will remain the same through both guns and flow will be decreased in half.
PSI 3600
Gallons Per Minute 10
Temperature 190°F

Equipment Type Pressure Washer
PSI 400-4500
Inlet 1/2" FPT
Outlet 1/2" FPT
1/2" FPT Bypass
Suitable for use with multiple guns at the same time. Dynamic seals made up of o-rings and teflon runner. Optimized internal passages that guarantee reduced pressure loss. No risk of fittings being ejected in case of overpressure because o-rings are positioned upstream to the threads. 1/4" FPT fitting for pressure gauge
Pressure drop to reset bypass: 32% (This is the pressure reduction necessary in comparison to the set up in order that the valve brings back pressure in the circuit, % figures of the pressure set up)
Unloader is designed to operate at a CONTINUOUS water temperature of 140F. It can be operated for short periods at a maximum temperature of 195F.
Temperature 195°F
Weight 2.5 lbs

Equipment Type Pressure Washer
PSI 500-5100
Inlet 1/2" FPT
Outlet 1/2" FPT
1/2" FPT Bypass
Suitable for use with multiple guns at the same time. Dynamic seals made up of o-rings and teflon runner. Optimized internal passages that guarantee reduced pressure loss. No risk of fittings being ejected in case of overpressure because o-rings are positioned upstream to the threads. 1/4" FPT fitting for pressure gauge
Pressure drop to reset bypass: 32% (This is the pressure reduction necessary in comparison to the set up in order that the valve brings back pressure in the circuit, % figures of the pressure set up)
Unloader is designed to operate at a CONTINUOUS water temperature of 140F. It can be operated for short periods at a maximum temperature of 195F
Weight 2.5 lbs
Temperature 195°F