General Pump Flow Actuated Unloader

Equipment Type Pressure Washer
PSI 3000
Inlet 3/8" FPT
Outlet 3/8" MPT
Size 6.31" x 4.00" x 2.75"
Bypass Port 3/4" MPT
Discharge Pressure 1450 TO 2900 PSI
This unloading valve is a flow-through design and should be mounted on the discharge line of the pump in any position (vertical or horizontal) which allows easy access to the adjusting bolt. A pressure gauge should be installed on either side of the port of the unloader to accurately read pressure during adjustment. Minimum 5% bypass is required for proper operation. Features all stainless and brass internal parts. No external moving parts or springs. Unique balance principle: eliminates high pressure in all lines while unit is in bypass mode. Elimiates pressure peaks normally generated by conventionally designed unloaders. Dual gauge ports Flow actuated unloaders are activated when the trigger of the gun is released and the flow stops. Pressure between the pump and gun is reduced to near zero pressure.
Gallons Per Minute 4.2 to 6.6
Temperature 165°F
Weight 2.3 lbs

Equipment Type Pressure Washer
Gallons Per Minute 3.0 to 4.2
Inlet 3/8" FPT
Outlet 3/8" MPT
Size 7.50" x 3.75" x 3.50"
Bypass Port 3/8" FPT
This unloading valve is a flow-through design and should be mounted on the discharge line of the pump in any position (vertical or horizontal) which allows easy access to the adjusting bolt. A pressure gauge should be installed on either side of the port of the unloader to accurately read pressure during adjustment. Minimum 5% bypass is required for proper operation. Features all stainless and brass internal parts. No external moving parts or springs. Unique balance principle: eliminates high pressure in all lines while unit is in bypass mode. Elimiates pressure peaks normally generated by conventionally designed unloaders. Dual gauge ports
PSI 3500
Temperature 165°F
Weight 4.5 lbs

Equipment Type Pressure Washer
Inlet 3/8" FPT
Outlet 3/8" MPT
Size 7.50" x 3.75" x 3.50"
Bypass Port 3/8" FPT
This unloading valve is a flow-through design and should be mounted on the discharge line of the pump in any position (vertical or horizontal) which allows easy access to the adjusting bolt. A pressure gauge should be installed on either side of the port of the unloader to accurately read pressure during adjustment. Minimum 5% bypass is required for proper operation. Features all stainless and brass internal parts. No external moving parts or springs. Unique balance principle: eliminates high pressure in all lines while unit is in bypass mode. Elimiates pressure peaks normally generated by conventionally designed unloaders. Dual gauge ports.
PSI 3500
Weight 4.5 lbs
Temperature 165°F

Equipment Type Pressure Washer
PSI 3000
Inlet 3/8" FPT
Outlet 3/8" MPT
Size 6.31" x 4.00" x 2.75"
Bypass Port 1/2" FPT & 3/4" MPT
Discharge Pressure 1450 TO 2900 PSI
This unloading valve is a flow-through design and should be mounted on the discharge line of the pump in any position (vertical or horizontal) which allows easy access to the adjusting bolt. A pressure gauge should be installed on either side of the port of the unloader to accurately read pressure during adjustment. Minimum 5% bypass is required for proper operation. Features all stainless and brass internal parts. No external moving parts or springs. Unique balance principle: eliminates high pressure in all lines while unit is in bypass mode. Elimiates pressure peaks normally generated by conventionally designed unloaders. Dual gauge ports Flow actuated unloaders are activated when the trigger of the gun is released and the flow stops. Pressure between the pump and gun is reduced to near zero pressure.
For European Style Pressure Washers
Gallons Per Minute 3.0 to 4.2
Temperature 165°F
Weight 2.3 lbs

Equipment Type Pressure Washer
PSI 3000
Inlet 3/8" FPT
Outlet 3/8" MPT
Size 6.31" x 4.00" x 2.75"
Bypass Port 3/4" MPT
Discharge Pressure 1450 TO 2900 PSI
This unloading valve is a flow-through design and should be mounted on the discharge line of the pump in any position (vertical or horizontal) which allows easy access to the adjusting bolt. A pressure gauge should be installed on either side of the port of the unloader to accurately read pressure during adjustment. Minimum 5% bypass is required for proper operation. Features all stainless and brass internal parts. No external moving parts or springs. Unique balance principle: eliminates high pressure in all lines while unit is in bypass mode. Elimiates pressure peaks normally generated by conventionally designed unloaders. Dual gauge ports Flow actuated unloaders are activated when the trigger of the gun is released and the flow stops. Pressure between the pump and gun is reduced to near zero pressure.
Gallons Per Minute 6.6 to 10
Weight 2.3 lbs
Temperature 165°F

Equipment Type Pressure Washer
PSI 1450
Inlet 3/8" FPT
Outlet 3/8" MPT
Size 5.75" x 3.50" x 2.75"
This unloading valve is a flow-through design and should be mounted on the discharge line of the pump in any position (vertical or horizontal) which allows easy access to the adjusting bolt. A pressure gauge should be installed on either side of the port of the unloader to accurately read pressure during adjustment. Minimum 5% bypass is required for proper operation. Features all stainless and brass internal parts. No external moving parts or springs. Unique balance principle: eliminates high pressure in all lines while unit is in bypass mode. Elimiates pressure peaks normally generated by conventionally designed unloaders. Dual gauge ports
Flow actuated unloaders are activated when the trigger of the gun is released and the flow stops. Pressure between the pump and gun is reduced to near zero pressure.
Bypass Port 3/4" MPT & 1/2" F
Discharge Pressure 0 to 1450 PSI
Gallons Per Minute 2.1 to 3.0
Temperature 165°F

Equipment Type Pressure Washer
Gallons Per Minute 2.1 to 3.0
Inlet 3/8" FPT
Outlet 3/8" MPT
Size 7.50" x 3.75" x 3.50"
Bypass Port 3/8" FPT
This unloading valve is a flow-through design and should be mounted on the discharge line of the pump in any position (vertical or horizontal) which allows easy access to the adjusting bolt. A pressure gauge should be installed on either side of the port of the unloader to accurately read pressure during adjustment. Minimum 5% bypass is required for proper operation. Features all stainless and brass internal parts. No external moving parts or springs. Unique balance principle: eliminates high pressure in all lines while unit is in bypass mode. Elimiates pressure peaks normally generated by conventionally designed unloaders. Dual gauge ports.
PSI 3500
Temperature 165°F
Weight 4.5 lbs

Equipment Type Pressure Washer
Inlet 3/8" FPT
Outlet 3/8" MPT
Size 7.50" x 3.75" x 3.50"
Bypass Port 3/8" FPT
This unloading valve is a flow-through design and should be mounted on the discharge line of the pump in any position (vertical or horizontal) which allows easy access to the adjusting bolt. A pressure gauge should be installed on either side of the port of the unloader to accurately read pressure during adjustment. Minimum 5% bypass is required for proper operation. Features all stainless and brass internal parts. No external moving parts or springs. Unique balance principle: eliminates high pressure in all lines while unit is in bypass mode. Elimiates pressure peaks normally generated by conventionally designed unloaders. Dual gauge ports.
Gallons Per Minute 4.2 to 6.6
PSI 3500
Temperature 165°F
Weight 4.5 lbs

Equipment Type Pressure Washer
PSI 1450
Inlet 3/8" FPT
Outlet 3/8" MPT
Size 5.75" x 3.50" x 2.75"
Bypass Port 3/4" MPT
This unloading valve is a flow-through design and should be mounted on the discharge line of the pump in any position (vertical or horizontal) which allows easy access to the adjusting bolt. A pressure gauge should be installed on either side of the port of the unloader to accurately read pressure during adjustment. Minimum 5% bypass is required for proper operation. Features all stainless and brass internal parts. No external moving parts or springs. Unique balance principle: eliminates high pressure in all lines while unit is in bypass mode. Elimiates pressure peaks normally generated by conventionally designed unloaders. Dual gauge ports
Flow actuated unloaders are activated when the trigger of the gun is released and the flow stops. Pressure between the pump and gun is reduced to near zero pressure.
Discharge Pressure 0 to 1450 PSI
Gallons Per Minute 2.1 to 3.0
Temperature 165°F

Equipment Type Pressure Washer
PSI 1450
Inlet 3/8" FPT
Outlet 3/8" MPT
Size 5.75" x 3.50" x 2.75"
This unloading valve is a flow-through design and should be mounted on the discharge line of the pump in any position (vertical or horizontal) which allows easy access to the adjusting bolt. A pressure gauge should be installed on either side of the port of the unloader to accurately read pressure during adjustment. Minimum 5% bypass is required for proper operation. Features all stainless and brass internal parts. No external moving parts or springs. Unique balance principle: eliminates high pressure in all lines while unit is in bypass mode. Elimiates pressure peaks normally generated by conventionally designed unloaders. Dual gauge ports
Flow actuated unloaders are activated when the trigger of the gun is released and the flow stops. Pressure between the pump and gun is reduced to near zero pressure.
Bypass Port 3/4" MPT
Discharge Pressure 0 to 1450 PSI
Gallons Per Minute 3.0 to 4.2
Temperature 165°F