Description
|
.650" Solid Shaft Triplex Plunger Pump
|
Fits Model
|
N/A
|
Also Fits Model
|
|
|
|
|
CAT PUMPS |
270 3 Frame Pumps |
|
Replaces OEM
WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Specifications
| Type |
Solid Shaft Pump |
| Inlet |
Dual 1/2" FPT |
| Size |
10.3" x 8.8" x 5.2" |
| |
Triplex plunger design gives smoother fluid flow |
| |
High pressure seals are completely lubricated and cooled by the fluid being pumped |
| |
Inlet and discharge valve assemblies interchange for easier maintenance |
| |
Lubricated low pressure seal provides double protection against external leakage |
| |
Oil bath crankcase assures optimum lubrication |
| |
Close tolerance concentricity of the ceramic plunger maximizes seal life |
| |
All stainless steel valves are heat treated and seats are roller burnished for a positive seal and extended valve life |
| |
Brass, stainless steel, or nickel aluminum brass manifolds for strength and corrosion resistance |
| |
Special hardened, polished surface of solid ceramic plunger is abrasion resistant and results in extended seal life |
| |
Specially formulated CAT PUMP exclusive, HI-Pressure seals offer unmatched performance and seal life |
| |
Diecast aluminum crankcase provides high strength, minimum weight and precision tolerance control |
| |
Chrome-moly crankshaft gives unmatched strength and surface hardness |
| |
Oversized crankshaft bearings with greater loading capacity mean longer bearing life |
| |
Valve assemblies are accessible without disturbing piping, for quick service |
| |
Preset packings mean no packing gland adjustment is necessary, reducing maintenance costs |
| |
Wet end is easily serviced without entering crankcase, requiring less time and effort |
| |
Maximum Inlet Pressure: 60 PSI |
| |
Maximum Pump Speed: 1420 RPM |
| |
Minimum Horsepower Requirements: 3.6 bhp (5.4 hp for gas engines) |
| |
Stroke: .512" (13mm) |
| |
Crankcase Capacity: 10 oz. use CAT Pump hydraulic oil |
| |
Maximum Fluid Temperature: 160° F. |
| |
Pulley Mounting: Either side |
| |
Lubrication: fill crankcase with CAT Pump hydraulic oil per pump specifications. DO NOT RUN PUMP WITHOUT OIL IN CRANKCASE. Change initial oil after a 50 hour break in period, and every three months or 500 hour intervals thereafter. |
| |
Rails and Protective Cap Not Included |
| Gallons Per Minute |
3.5 |
| Bore |
.708" (18mm) |
| Outlet |
Dual 3/8" FPT |
| Shaft Size |
Solid .650" (16.5mm) |
| Weight |
13.3 lbs |
| Equipment Type |
Pressure Washer |
| PSI |
1500 |
Customer Reviews for the
.650" Solid Shaft Triplex Plunger Pump
There are no reviews for this product at the time.
Repair Tips For
Barens 2612
No repair tips at this time.