JavaScript Disabled - Unable to show Cart
There are (267) parts used by this model.
- Found on Diagram:
Bolo Tine Assemblies
-
1900871001
No Longer Available
-
GW9669
No Longer Available
-
-
-
GW1205
TINE HOLDER W/SHIE
For left or right side of tiller. PTO Horse Model Tillers may come equipped with either Part #2415 Welded St
$202.65
-
GW1463
No Longer Available
-
GW1461
No Longer Available
-
GW1735
NO LONGER AVAILABLE
Includes one each Part #1483 bolt, #9914 lockwasher and #1461 washer. Use with Part 81205 tine holder only
No Longer Available
-
-
-
-
-
-
-
GW2253
NO LONGER AVAILABLE
used as needed to correct loose-fitting tines mounted on cast iron tine holders only
No Longer Available
-
GW2254
NO LONGER AVAILABLE
used as needed to correct loose-fitting tines mounted on cast iron tine holders only
No Longer Available
-
1901118A
Bolo Tine Kit (No Longer Available)
Includes eight each of Part #1270-1A and #1270-2A tines and sixteen each of #9711 bolts, #9913 lockwashers and #8802 hex nuts. Includes easy-to-follow instructions for installing tines on welded steel tine holders or cast iron tine holders. DOES NOT INCLU
No Longer Available
- Found on Diagram:
Depth Regulator & Tine Hood Assemblies
-
-
-
-
-
1900864
Depth Regulator
Includes #9119 knob (Ref. 07) and M20 retaining ring (Ref. M6)
$76.49
-
-
-
-
7100599
Screw
(lockwasher and nut not required). Mounts hood to bracket; Replaces 9723
$3.90
-
-
-
-
-
-
GW2610
No Longer Available
-
-
-
-
-
-
- Found on Diagram:
Electric Start System - 6HP, 7HP, & 8HP Tillers
-
-
GW9255
No Longer Available
-
7100599
Screw
one for grounding negative cable and two for mounting solenoid to bracket
$3.90
-
-
-
1900873
BATTERY HOLD DOWN
(includes #20418 decal). Introduced on Tiller Serial #648406. Use with #2182 battery bracket; Replaces 1468
$143.61
-
-
GW9230
NO LONGER AVAILABLE
includes two 89243 keys, one lockwasher and one mounting nut (hardware not available separately from Garden Way)
No Longer Available
-
GW9243099
No Longer Available
-
GW-9565
BOLT - carriage, 1/4"-20 x 1-1/2", hold-down clamp to bracket
No Longer Available
-
-
-
9251707D
Battery (Dry) (No Longer Available)
IMPORTANT: For Tiller Serial Nos. 685484 & Below, contact Technical Service 9123, Department regarding special battery replacement kit before ordering battery; Replaces 94878
No Longer Available
-
GW1959
SOL W/HDWE KIT
includes all washers and nuts (Ref. No's. 15, 16, 17 & 18) for cables and wires; Replaces 9127
$103.91
-
-
-
-
-
GW9223
No Longer Available
-
GW-2182
BATTERY BRACKET- introduced on Tiller Serial #648406.
No Longer Available
-
GW9558
No Longer Available
-
-
GW9265
No Longer Available
-
GW9009
No Longer Available
-
GW1475
No Longer Available
-
GW9224
No Longer Available
-
-
GW1552
NO LONGER AVAILABLE
for Tecumseh and Kohler engines; Includes two receptacles; three red wires (solenoid activate, battery recharge, and starter switch); one green (shutoff) wire; plastic harness tube
No Longer Available
-
GW9218
No Longer Available
-
N/A
FUSE - 6 Amperes, 3 AGC,
No Longer Available
-
N/A
DIODE - battery recharging
No Longer Available
-
-
-
GW-20424
WIRE HARNESS -
No Longer Available
-
1901894
No Longer Available
-
-
N/A
LOCKWASHER - internal tooth, 1/4" Comes with engine-not avail. from Garden Way
No Longer Available
-
- Found on Diagram:
Forward/Neutral/Reverse Lever & Yoke Assembly
-
64704006
Lever Assembly
Includes plastic knob with plastic decal inlay. Lever and knob available as complete assembly only
$119.36
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
N/A
KNOB -
No Longer Available
- Found on Diagram:
Handlebar Assembly
-
1901004
No Longer Available
-
-
-
-
-
-
-
1900856010
No Longer Available
-
-
-
GW2700P
No Longer Available
-
GW2214
No Longer Available
-
-
GW2412
No Longer Available
-
-
GW9015
NO LONGER AVAILABLE
for 6 HP Tecumseh, 7 HP Kohler and 8 HP Briggs & Stratton engines. Does not include Ref. No. 15, #9733 Screw or Ref. No.18, 89116 Clip; Replaces 9240
No Longer Available
-
GW9033
NO LONGER AVAILABLE
for 8 HP Kohler engine. Does not include Ref. No. 15, #97333 screw or Ref. No. 18, #9116 Clip
No Longer Available
-
-
GW2449
No Longer Available
-
- Found on Diagram:
Power Unit Transmission Assemblies
-
-
GW9463
KNOB TAPERED
TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES
$10.42
-
GW2263
PLATE TINE ENGAGE
Includes #2139 operating decal (Ref. #4); TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES
$46.33
-
-
GW9558
No Longer Available
-
-
71004043
Screw
TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES
$4.00
-
9360119
Lock Washer
TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES
$4.34
-
-
-
GW9362
PIN SPRING
TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES
$3.85
-
GW9838
NO LONGER AVAILABLE
Call Technical Service Department for tightening Instructions; TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES
No Longer Available
-
-
-
N/A
LEVER - wheel speed shift
No Longer Available
-
GW-1103
COVER- power unit transmission housing
No Longer Available
-
GW11346
NO LONGER AVAILABLE
Completely assembled with neutral spring assembly parts (Ref. #'s 18,19,20, 21,22, 23 and 24); TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES
No Longer Available
-
GW1123
Gasket
TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES
$7.51
-
7100376
Hex Screw
Retains neutral plunger (REMOVE WITH CARE). See Ref. #'s 20 & 21; TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES
$3.69
-
-
-
-
1901440
RING KLIP
TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES
$4.83
-
1186393
Flange Nut
TRANSMISSION COVER & SHIFT LEVER BRACKET ASSEMBLIES
$2.66
-
GW9558
No Longer Available
-
78604002
LEVER ECCENTRIC SH
TINES/P.T.O. CLUTCH LEVER ASSEMBLY; (Also see Ref. #'s 1, 2, 3 and 4 listed above.)
$50.11
-
-
-
-
-
-
71004354
Screw
For use with Tiller Serial Nos. 771566 & Above.; TINES/P.T.O. CLUTCH LEVER ASSEMBLY
$3.42
-
-
-
1902404
Clutch Kit
Replaces 2120-2; For use with Tiller Serial Nos. 771566 & Above. For Serial Nos. 771565 & Below order #2120-2 dog clutch; DRIVE SHAFT ASSEMBLY
$147.52
-
-
-
-
-
-
-
-
-
-
-
-
-
GW1985
KIT TRANS DRSHAFT
Includes welded-on worm, two pressed-on cone roller bearings, two bearing cups, and two shoulder washers; DRIVE SHAFT ASSEMBLY
$431.42
-
-
-
-
GW1060A
No Longer Available
-
-
GW11323
SHIM
PINION SHAFT ASSEMBLY
-
-
-
-
-
GW1221
No Longer Available
-
GW9300
KEY
PINION SHAFT ASSEMBLY
$3.25
-
-
-
-
-
-
GW1878
Wheel Shaft Kit
Includes #9357 key (Ref. #66) and two #9511 retaining rings (Ref. #62); WHEEL SHAFT ASSEMBLY
$203.47
-
-
-
-
-
-
-
-
92104034
Oil Seal
Replaces 9611; ECCENTRIC SHAFT ASSEMBLY
$9.45
-
73804448
PIN
ECCENTRIC SHAFT ASSEMBLY
$7.21
-
-
GW1441
SPRING
ECCENTRIC SHAFT ASSEMBLY
$3.65
-
73604079
WASHER
ECCENTRIC SHAFT ASSEMBLY
$4.17
-
GW2109099
HSG POWER UNIT TRA
Includes #9359 alignment pin (Ref. #79); TRANSMISSION HOUSING; Empty housing without covers, shafts, gears, seals, etc. Call Factory Technical Service Dept before ordering; TRANSMISSION HOUSING
$830.15
-
-
GW-9660
BOLT-hex. hd., 1/2"-13 x 2", Grade 5. Connects power unit and tiller attachment housings
No Longer Available
-
-
GW2126
No Longer Available
-
-
-
GW-4921-1
OIL SEAL DRIVER -
No Longer Available
-
GW49212
NO LONGER AVAILABLE
for wheel shaft oil seals (use with Part #4921-1 Seal Driver); MISCELLANEOUS PARTS
No Longer Available
-
- Found on Diagram:
Tiller Attachment Transmission Assemblies
-
1186309
No Longer Available
-
-
-
-
-
-
-
-
-
-
-
GW2127
No Longer Available
-
-
-
-
-
-
-
GW1986
TILLER DRIVESHAFT
Includes welded-on worm gear, two pressed-on cone roller bearings, two bearing cups (Ref.#18) and one shoulder washer .766 X 1.0
$348.16
-
-
-
GW2206
NO LONGER AVAILABLE
Includes pressed-on sleeve in front of housing and one tine shaft bearing cone 741-3051 & cup 741-3050 mounted in right side of housing.
No Longer Available
-
GW2136
No Longer Available
-
N/A
OIL SEAL DRIVER - for tiller shaft oil seals
No Longer Available
-
GW9945
No Longer Available
-
1186309
No Longer Available
- Found on Diagram:
Wheel Speed Lever, Belt Drive System, Engines, Wheels
-
-
GW9838
No Longer Available
-
-
-
GW2628
LVR W/KNOB
Includes #2244 knob (Ref. #8) and 199120 retaining ring (Ref. #18)
$126.05
-
-
-
-
-
-
-
N/A
LOCKNUT-hex. hd., 5/16"-18, retains swivel to eccentric lever
No Longer Available
-
-
-
-
-
-
-
GW1920
Adjusting Block Kit
Includes mounting hardware and belt adjustment rod (Ref. #'s 13,14,15, & 20
$53.68
-
-
-
7100459A
Hex Screw
For Kohler and Briggs & Stratton Engines
-
-
-
-
-
-
-
-
-
-
-
-
GW-1968
MOUNT- engine to tiller
No Longer Available
-
N/A
TECUMSEH ENGINE - 6 HP, recoil start,
No Longer Available
-
-
GW9142
No Longer Available
-
1915056
No Longer Available
-
1915057
No Longer Available
-