JavaScript Disabled - Unable to show Cart
There are (123) parts used by this model.
- Found on Diagram:
A/C Components
-
-
-
-
-
-
38067013
COMPRESSOR
Diameter: 6"( 152mm) Voltage: 12, PAG 100-300cc, SD7H15-SHD.
$468.08
- Found on Diagram:
Brake System Components
-
-
14022006
BRAKE DISC
ID: 2 1/4" (57mm) w/ 15 teeth, OD: 12" (306mm)
$142.96
- Found on Diagram:
Clutch, Transmission & PTO Components
-
12126007
CLUTCH DISC
Friction Disc, ID: 3.65" (92.7mm) w/ 45 teeth, OD: 5.24" (133.1mm), Ht: .0629" (1.6mm)
$23.61
-
14120004
CLUTCH PLATE
11" Double Pressure plate, PTO disc spline is 1.5" x 23
$654.32
-
14120005
PTO DISC
9" Spring PTO Disc with 1-1/2" 23 Spline Hub
$152.17
-
14120006
CLUTCH PLATE
12-7/8" Diaphragm Style Pressure Plate with 1-1/2" 23 Spline hub
$750.89
-
14122004
CLUTCH KIT
LuK RepSet®, clutch kit, includes 11" 6 bolt, cast iron, 3 lever, double pressure plate, 15 spline, torsion drive disc, 100mm OD, 37mm Thk release bearing, 15mm ID pilot bearing.
$1,188.48
-
14122005
CLUTCH KIT
LuK RepSet®, clutch kit, includes 11" 6 bolt, cast iron, 3 lever, double pressure plate, 15 spline, torsion drive disc, 100mm OD, 56mm Thk release bearing, 15mm ID pilot bearing.
$1,100.95
-
14122039
CLUTCH KIT
LuK RepSet® clutch kit, includes 12.6" (320mm), 6 bolt, cast iron, 1 1/2" x 23 spline, fixed PTO hub, with release ring, single clutch, 15 spline spring dampened disc, 96mm OD, 57mm Thk release bearing, 15mm ID pilot bearing. For units w/ potted flywheel.
$1,418.70
-
14122041
CLUTCH KIT
LuK RepSet® clutch kit, includes 12.6" (320mm), 6 bolt, cast iron, 1 1/2" x 23 spline, fixed PTO hub, with release ring, single clutch, 15 spline, 7 pad cerametallic, spring dampened disc, 96mm OD, 57mm Thk release bearing, 15mm ID pilot bearing. For units w/ potted flywheel.
$1,190.90
-
14122049
CLUTCH KIT
LuK RepSet® clutch kit, includes 13" (330mm), 6 bolt, cast iron, 1 1/2" x 23 spline, fixed PTO hub, with release ring, single clutch, 15 spline spring dampened disc, 96mm OD, 57mm Thk release bearing, 15mm ID pilot bearing. For units w/ potted flywheel.
$1,399.48
-
14122050
CLUTCH KIT
LuK RepSet® clutch kit, includes 13" (330mm), 6 bolt, cast iron, 1 1/2" x 23 spline, fixed PTO hub, with release ring, single clutch, 15 spline, 7 pad, cerametallic, spring dampened disc, 96mm OD, 57mm Thk release bearing, 15mm ID pilot bearing. For units w/ potted flywheel.
$1,171.69
-
-
-
-
-
-
14126023
PTO DISC
ID: 1 1/8" (28mm) w/ 19 teeth, OD: 4 5/16" (110mm)
$36.74
-
14126024
CLUTCH PLATE
ID: 3 7/8" (99mm), OD: 5 5/8" (143mm) includes 10 tabs.
$17.23
-
14126026
CLUTCH PLATE
ID: 3 7/8" (99mm), OD: 6" (152mm) includes 6 tabs.
$15.59
-
14126052
CLUTCH PLATE
ID: 3 7/8" (99mm), OD: 5 5/8" (143mm) includes 10 tabs.
$34.23
- Found on Diagram:
Cooling System Components
-
-
-
14066208
WATER PUMP
With Gasket & Components; OA DIM's: 10" X 8" x 6"
$258.34
-
14066213
WATER PUMP
Replaces the following casting numbers: R70437, R78286, R70434 Includes hub.
$215.09
-
14066317
RADIATOR
H: 26 7/16", W: 19 5/8", side frame W: 3 11/16", inlet OD: 2", outlet OD: 2". Copper core.
$997.02
-
14066318
RADIATOR
The radiator has 8 fins per inch and 4 rows of tubes. It is 20.625" tall and the core size is 19" wide. (SN <669788). Copper core.
$910.31
- Found on Diagram:
Electrical Components
-
14000100
STARTER
12v, 10 tooth, Direct Drive Bosch type unit. 3.0KW, two (2) bolt mount. Uses Atlantic 1400-0203 solenoid and Atlantic 1400-0300 drive. Uses correct 13.5mm mounting hole diameter on DE.
$251.46
-
14000154
STARTER
OSGR Replacement Starter for 1400-0100. 12V, CW, 10 Tooth
$228.80
-
14000195
STARTER
12v, 3.4kw, 10 tooth, clockwise, PLGR, OE Iskra (Mahle)
$557.21
-
14000196
STARTER
12v, 3.2kw, 10 tooth, clockwise, PLGR, OE Iskra (Mahle)
$528.76
-
14000203
SOLENOID
12v, three (3) terminal, Bosch type for DD starters. Mount w/three (3) screws.
$40.43
-
14000500
ALTERNATOR
12v, I/R, 33 amp Bosch type unit w/B+ post and D+ post.
$262.17
-
14000501
ALTERNATOR
12v, I/R, 55 amp Bosch type w/o pulley. Uses B+ post, D+ post, and W terminal spade.
$236.06
-
-
14000567
ALTERNATOR
12v, 51a, IR, EF, clockwise, Motorola replacement
$214.49
-
14000590
ALTERNATOR
12v, 55a, IR, EF, clockwise, Bosch style, clock position: 12
$151.09
-
-
-
-
17000507
ALTERNATOR
12v, I/R, 95 amp unit. Bosch style w/B+ - D+ stud terminals, W spade terminal. W/o pulley. Alternator for diesel applications.
$190.64
- Found on Diagram:
Engine Components
-
-
-
-
-
-
14094239DM
ENGINE BASE KIT
Diesel Engine Base kit for 4.239D engine. Includes standard piston kits (RE30250), complete gasket set with front and rear crank seals, 6 Balance Shaft bushings, 8 Capscrews also called Conrod bolts, injector grommet set and connecting rod bushings. To maximize kit you would add 4 conrod bearing pai
$1,127.17
-
14095000
FLYWHEEL
Fits with 12", 12-5/8" and 12-7/8" Pressure Plate Assemblies. Flywheel has 13" I.D and does not come with Ring Gear.
$585.16
-
14095100
FLYWHEEL W/RING GEAR
Fits with 12", 12-5/8" and 12-7/8" Pressure Plate Assemblies. Flywheel has 13" I.D and does come with Ring Gear. Flywheel ring gear w/142 teeth, OD is 14.325" by ID of 13.370" by Width of .406" replaces ref#T20088.
$584.94
-
14095500
RING GEAR
Flywheel ring gear w/142 teeth, OD is 14.325" by ID of 13.370" by Width of .406". Replaces ref#T20088, used w/flywheel ref#RE18678.
$46.71
-
- Found on Diagram:
Filters
-
AF1449
AIR FILTER
This filter is currently available in Baldwin brand. Air filter for diesel and gas applications.
$109.45
-
-
HF1409
LUBE FILTER
OD: 3-3/4 (95.3), Length: 9-19/32 (243.7), Thread: 1-3/8 x 12 UNF. Lube filter for diesel and gas applications.
$43.24
-
OF3103
LUBE FILTER
Features: 20 PSID By-Pass Valve. Lube filter for diesel and gas applications.
$6.28
- Found on Diagram:
Front Axle & Steering Components
-
14041002
SPINDLE
LH/RH, Pivot Shaft: 14.88" (378mm) long
$306.48
-
14041010
SPINDLE
RH/LH, pivot shaft 14.98" (381mm) long
$394.41
-
-
14041051
TIE ROD TUBE
12.218" Long, .812" I.D. Dim, 1.125" -12 O.D. thread
$44.98
-
14041052
TIE ROD TUBE
Length: 13.94" (354.08mm), ID: 0.89" (22.61mm), Thread: M24 x 1.5" right hand
$44.98
-
14041053
DRAG LINK
Complete drag link assembly includes outer tie rod ends. Adjustable length: 16"-28"
$135.15
-
14041054
DRAG LINK
Complete drag link assembly with adjustable tie rod ends. Adjustable thread length: 18.3mm
$180.24
-
14041062
TIE ROD END
Length: 3.88" (98.55mm), Shaft OD: 0.94" (24mm) Thread: 1.5"
$38.21
-
-
-
-
-
14041101
SPINDLE
Spindle Shaft length is 9.875", shaft diameter is 1.325", Axle shaft inner is 1.325", Axle shaft outer is 0.842".
$159.32
-
-
-
14042005
RETAINER, BEARING
Wear Sleeve, hub bushing. OD: 2.036" (51.7mm), ID: 1.624" (41.4mm) W: .236" (6.32mm)
$5.62
-
-
14043152
O RING
OD: 1.6", ID: 1.38", W: 0.11
$2.01
-
-
14043154
HUB PIN
Pivot pin front axle (MFWD).
$101.34
-
-
14043156
OIL SEAL
Internal diameter: 4.80 inches External diameter: 5.90 inches Width: 0.53 inch
$94.67
-
14043157
TIE ROD END
Tie rod end w/nut, 285.75mm (11 1/4") length and open metric end port of 18mm with 1.5 metric RH thread pitch.
$72.03
-
14043158
BALL JOINT RH
Overall Length 7" (177.8 mm); top M20 X 1.5 RH Thrd; bottom M18 X 1.5 RH Thrd
$99.09
-
-
-
14043253
PLANETARY GEAR
Internal diameter: 2.21 inches Outside diameter:3.2 inches Width: 1.065 inches Number of teeth: 46
$236.71
-
-
-
-
-
-
14043904
FRONT PIVOT PIN
Front steering pivot pin Length: 3.52" (89.41mm), OD: 1.25" (31.75mm)
$22.44
-
14044800
STEERING WHEEL
Mat vinyl material w/three spokes. 16" OD, splined hub.
$56.25
-
- Found on Diagram:
Fuel System Components
-
-
-
14033701
INJECTOR
Pencil type for 300 Series motors. Stamped Id # 27333.
$59.94
-
14033703
INJECTOR
Pencil type for 300 series motors. Stamped Id # 27336.
$56.31
- Found on Diagram:
Hitch and Implement Components
-
14130001
LIFT LINK ASSEMBLY
Cat 1 (Closed length 21 1/4" Extended length 27 1/2") for 3 point hitch. Some aftermarket companies use AR44552 or RE16370 for reference numbers.
$185.21
-
14130006
TOP LINK
Top Link Assembly, Min Length: 23.23" (590mm), Max Length: 32.68" (830mm), Cat I tractor end, Cat II implement end.
$60.90
-
- Found on Diagram:
Hydraulic & Power Steering Components
-
-
-
14010508
COUPLING
Hydraulic pump drive coupling, rear
$21.35
-
14010509
CUSHION
Hydraulic pump drive isolator, cushion
$14.08
-
14010510
COUPLING
Hydraulic pump drive coupling, front, 4 bolt.
$23.73
-
14010513
PUMP DRIVE SHAFT
Hydraulic Pump Drive Shaft, LOA: 7.9" (200.7mm), ID: .872" (22.15mm) with key way
$85.16
-
14010514
PUMP DRIVE SHAFT
Internal Length Usable: 7.37" (187.2mm) - 14 spline, LOA: 9 3/8"
$173.31
-
14011107
STEERING MOTOR
Replacement for Danfoss OSPC 125CN 150-0179 steering control valve (units w/ 4wd)((3050 & 3350 2wd & increased lift capacity))
$836.11
-
14011200
HYDRAULIC PUMP
Old fluid needs to be completely flushed-use clean new fluid. 1 1/16" Top Inlet, 1 1/16" Right Inlet, 3/4" Right Discharge. Keyed input shaft.
$1,072.87
-
14011203
HYDRAULIC PUMP
Old fluid needs to be completely flushed-use clean new fluid. 1 1/16" Left inlet, 7/8" Top Inlet, 1 5/8" Right Inlet, 7/8" Right Discharge. If replacing AR39695 or AR90459, you may also need AT49331, R39741, P47908, U13639 AND F3171R from John Deere.
$1,506.52
-
-
- Found on Diagram:
Muffler
-
-
-
14177708
EXHAUST PIPE
Pipe. Outlet is 3" OD. Inlet is 3" OD, 52.5" long, 3" wide.
$197.02
- Found on Diagram:
Sheet Metal and Grille
-
14115006
FENDER RH
Fender assembly, Right side, fits tire sizes; 14.9 X24, 16.9 X 24, 18.4 X 26, 13.6 X 28, 14.9 X 28, 16.9 X 28. Shipped with a protective primer finish allowing for a better match to exact paint scheme.
$188.47
-
14115007
FENDER LH
Fender assembly, Left side, fits tire sizes; 14.9 X24, 16.9 X 24, 18.4 X 26, 13.6 X 28, 14.9 X 28, 16.9 X 28. Shipped with a protective primer finish allowing for a better match to exact paint scheme.
$192.82
-
-
14119001
GAS STRUT, REAR WINDO
Gas Spring (Window). LOA: 735mm, Stroke: 325mm, Force: 150N, Cyl Dia: 18mm, Rod Dia: 8mm. Ball and socket ends.
$18.43
- Found on Diagram:
Wheels, Hubs and Components
-
30081010
RIM
16x5.5 width. 4 5/8" center ID. 6 Lug
$100.56