JavaScript Disabled - Unable to show Cart
There are (74) parts used by this model.
- Found on Diagram:
Bearings
-
30200009
BEARING
Ball Bearing, ID: 1.378" (35mm), OD: 3.149" (80mm), W: 0.827" (21mm)
$51.92
- Found on Diagram:
Brake System Components
-
14022015
BRAKE PLATE
ID: 1 13/16" (46mm) w/ 12 teeth, OD: 12 1/16" (306mm)
$175.48
- Found on Diagram:
Clutch, Transmission & PTO Components
-
-
14126021
PTO DISC
ID: 3 5/8" (93mm) with 45 teeth, OD: 5 1/4" (133mm), .07" (1.6mm) width.
$12.90
-
17124433
CLUTCH PLATE
ID: 6 1/8" (156mm), OD: 8 7/16" (215mm) includes 3 tabs.
$35.97
- Found on Diagram:
Cooling System Components
-
14066208
WATER PUMP
With Gasket & Components; OA DIM's: 10" X 8" x 6"
$258.34
-
14066358
RADIATOR
OVERALL HEIGHT: 24 1/8 OVERALL WIDTH: 24 1/8 CORE HEIGHT: 17 5/8 CORE WIDTH: 23 1/4 DEPTH: 2 ROWS: 3 ROWS OF 1/2" TUBES ON 7/16" CENTERS FINS PER INCH: 8 FLAT FIN FILL NECK HEIGHT: 1 5/8 INLET: 1 1/2 OUTLET: 1 7/8
$1,127.17
- Found on Diagram:
Electrical Components
-
11000909
BULB
12v, 27/8.3 watt, double bayonet base. Type 1157. Priced individually, sold in multiples of 10.
$0.63
-
14000103
STARTER
12v, 10 tooth, 3.2KW, 28MT OSGR design. Uses 9840697 solenoid. DE housing uses 13.5mm mounting hole diameter.
$262.17
-
14000195
STARTER
12v, 3.4kw, 10 tooth, clockwise, PLGR, OE Iskra (Mahle)
$557.21
-
14000198
STARTER
12v, 2.8kw, 10 tooth, clockwise, PLGR, Iskra unit
$518.93
-
14000210
SOLENOID
12v, three terminal, grounds at base. Continuous duty type.
$18.96
-
14000505
ALTERNATOR
12v, I/R, 65 amp, Motorola type, has AC post, Ign/LMP post, B+ post. Regulator includes both IGN and Sense+ bolts.
$335.61
-
14000562
REGULATOR
RED - ISO DIODE (+); BLACK - GROUND; GREEN - FIELD. Regulator for diesel and gas applications.
$43.68
-
14000567
ALTERNATOR
12v, 51a, IR, EF, clockwise, Motorola replacement
$214.49
-
14000945
No Longer Available
-
17000512
ALTERNATOR
12v, I/R, 135 amp Bosch type w/o pulley. Has B+ stud, B- stud, W stud, D+ stud.
$274.09
- Found on Diagram:
Engine Components
-
-
-
-
-
-
14093047
CONROD BOLT
ConRod bolt for diesel applications, Length - 2 3/4"
$5.86
-
-
-
-
-
-
-
-
-
14094239DM
ENGINE BASE KIT
Diesel Engine Base kit for 4.239D engine. Includes standard piston kits (RE30250), complete gasket set with front and rear crank seals, 6 Balance Shaft bushings, 8 Capscrews also called Conrod bolts, injector grommet set and connecting rod bushings. To maximize kit you would add 4 conrod bearing pai
$1,127.17
-
14095100
FLYWHEEL W/RING GEAR
Fits with 12", 12-5/8" and 12-7/8" Pressure Plate Assemblies. Flywheel has 13" I.D and does come with Ring Gear. Flywheel ring gear w/142 teeth, OD is 14.325" by ID of 13.370" by Width of .406" replaces ref#T20088.
$584.94
-
- Found on Diagram:
Filters
-
AF1050
AIR FILTER
Dimensions: ID bottom: 17mm, ID top: 82.5mm, Height: 315mm, OD top: 157mm, OD bottom: 133.5mm Air filter for diesel and gas applications.
$32.78
-
AF1051
AIR FILTER
Dimensions: ID bottom: 17mm, ID top: 60.5mm, Height: 283mm, OD top: 94mm, OD bottom: 75mm Air filter for diesel and gas applications.
$28.08
-
FF1615
FUEL FILTER
This filter is currently available in Baldwin brand.
$9.22
-
OF3103
LUBE FILTER
Features: 20 PSID By-Pass Valve. Lube filter for diesel and gas applications.
$6.28
-
OF3201
LUBE FILTER
This filter is currently available in Baldwin brand.
$41.13
- Found on Diagram:
Front Axle & Steering Components
-
14041005
KING PIN
King Pin Kit includes: king pin, bushings, thrust washers, spring pin, seal, grease fittings and retaining bolt.
$180.24
-
14041058
AXIAL JOINT
8.250", M22 X 1.5 RH Thrd., M24 X 1.5 RH Thrd.
$101.34
-
14041064
AXIAL JOINT
8.20", M22 X 1.5 RH Thrd, M24 X 1.5 RH Thrd
$112.62
-
-
14042005
RETAINER, BEARING
Wear Sleeve, hub bushing. OD: 2.036" (51.7mm), ID: 1.624" (41.4mm) W: .236" (6.32mm)
$5.62
-
-
-
-
-
-
14044800
STEERING WHEEL
Mat vinyl material w/three spokes. 16" OD, splined hub.
$56.25
-
-
14047352
PLANETARY GEAR
35 tooth. 2140 s/n 430000 & up. 2140 (built in Spain) s/n 133493 & up.
$249.18
- Found on Diagram:
Fuel System Components
-
14033000
FUEL LIFT PUMP
Mechanical fuel transfer pump w/gasket. 3/8" by 20 pitch ports.
$42.50
-
14033701
INJECTOR
Pencil type for 300 Series motors. Stamped Id # 27333.
$59.94
-
14033704
INJECTOR
Pencil type for 1039T and 6095D series motors.
$56.31
- Found on Diagram:
Hydraulic & Power Steering Components
-
14010508
COUPLING
Hydraulic pump drive coupling, rear
$21.35
-
14010509
CUSHION
Hydraulic pump drive isolator, cushion
$14.08
-
14010510
COUPLING
Hydraulic pump drive coupling, front, 4 bolt.
$23.73
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- Found on Diagram:
Muffler
-
14173906
MUFFLER
Inlet I.D. Flared, Outlet O.D. 2", O/A Length 30", Inlet Length 3-1/2", Outlet Length 7-3/4", Shell Length 19-1/2".
$83.63
- Found on Diagram:
Wheels, Hubs and Components
-
14080001
HUB
2WD wheel hub, implement hub, 8 hole pattern
$115.58