So you just got a new trimmer, but you don't quite know where to begin to get it put together, well, here are some steps that will help you get your trimmer assembled in no time at all!

To mount the engine:

Step 1

Push the driveshaft housing towards the clutch housing and rotate it by hand to be sure that the driveshaft is engaged with the gears

Step 2

Insert the driveshaft housing into the clutch housing until it hits the bottom, then align the positioning holes on the clutch housing  with the  holes on the shaft tube and insert the screw. If it is difficult to engage twist the engine slightly

Step 3

Fasten the clamp securely with two screws

To connect the throttle wire:

Step 1

Remove the air cleaner cover

Step 2

Connect the end of the throttle wire to the joint located on the top of the carburetor

To connect the switch wires:

Step 1

Connect the switch wires between the engine and the main unit. Be sure that you pair together the wires that are the same color

To install the handle:

Step 1

Mount the handle to the shaft tube, clamp it to a location that is comfortable for you (about 19 inches from the main unit is recommended)

To install the debris guard:

Step 1

Attach the debris guard to the shaft using the bolts provided

Step 2

Installing the line head:

Step 3

While locking the gear shaft (by inserting the supplied tool into the upper holder on the gear box) loosen and remove the hexagon nut

Step 4

Fit the line head assembly to the gear shaft over the holders hand-tighten it securely

Now your trimmer is assembled and ready to go! If you need more specific details, consult your owner's manual!

Featured Parts:

• Redmax Trimmers

Jack's Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.

Assembling your tiller is easy, but just in case you don't know how, here is a handy video from Mantis to help you get your Classic Tiller up an running!

Featured Parts:

• Mantis Tillers

Jack's Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.

You've got a box full of parts. That surely isn't going to help you till your soil!

Here is a video by Mantis that will show you just how to assemble those parts and get your Mantis Electric Tiller up and running!

Featured Parts:

• Mantis Tillers

Jack's Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.

Is your tiller sitting in your garage in the box, and you just aren't quite sure where to begin.

Don't worry! Here are step by step instructions on how to get your tiller out of the box and running in no time

Step 1:

Open up the box.

Step 2:

Remove the bottle of oil, owner’s manual and packing tube.

Step 3:

Carefully remove the mini tiller.

Step 4:

Slightly lift the tiller to unfold the handle.

Step 5:

Be sure the cables don’t get crimped or pinched when unfolding the handle.

Step 6:

Remove the packing material from the handle.

Step 7:

Tighten the bolts on the handle securely.

Step 8:

Remove the remaining packaging.

Step 9:

The tiller will ship without oil in the engine, do not start the engine before adding oil.

Step 10:

Put the tiller on a level surface.

Step 11:

Tip forward onto the carrying handle.

Step 12:

Remove the oil filler cap.

Step 13:

Add the entire bottle of oil that came with the tiller.

Step 14:

Install oil fill cap and wipe up any spills.

Featured Parts & Products:

• Honda Mini Tiller

Jack's Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.

So you just bought a brand new Mantis Tiller. Can't wait to use it, right?

If you haven't yet, it may be because you are staring at a box of parts that claims to be your Mantis Deluxe Tiller. Yes, some assembly is required.

Here is a handy video from Mantis that will show you step-by-step instructions on how to assemble your new Deluxe Tiller. Keep your owner's manual handy as well.

Jack's Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.

Featured Products:

• Mantis Tillers