Replacing the Scraper Blade on an Ariens Two Stage Snow Blower
Watch our video on how to replace the scraper blade on an Ariens two stage snow blower.
The scraper blade scrapes the surface of snow and ice underneath your snow blower, since the augers don’t come into contact with the ground. After constant use, the scraper blade can wear down.
Step 1:
Remove the ignition key
Step 2:
Loosen bolts and remove the belt cover
Step 3:
Disconnect the chute crank and deflector cable
Step 4:
Remove frame housing bolts
Step 5:
Remove belt finger
Step 6:
Remove auger belts from pulleys
Step 7:
Separate auger housing from frame
Step 8:
Remove auger belts
To Install New Belts:
Step 1:
Re-attach the housing to the pivot rod on the frame
Step 2:
Slide the belts over the pulleys
Step 3:
Re-install the frame housing bolt
Step 4:
Re-install the belt finger
Step 5:
Re-attach the belt cover
Step 6:
Re-install the chute crank
Step 7:
Re-connect the deflector cable
Jack’s Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.
Featured Parts and Products:
- Model: Ariens Deluxe 28
- Scraper Blade: #04145959
- Ariens Snow Blower Parts
- New Ariens Snow Blowers
About the Author
Turner Anderson is the Internet Marketing Manager at Jack's and the editor of Jack's DIY Center. You'll also find him creating How-To articles, videos, newsletters, and much more.
Related Posts
How to Install an Ariens Heated Hand Warmer Kit on Your Ariens Snow Blower →
How to Adjust the Traction Drive Clutch on Your Ariens Power Brush →
How to Replace the Attachment Drive Belt on Your Ariens Power Brush →
How to Adjust the Speed Selector on Your Ariens Power Brush →
