Replacing the Auger Paddles on a Toro Single Stage Snow Blower
Watch our video on how to replace the auger paddles on a Toro single stage snow blower.
The auger paddles on a single stage snowblower come in direct contact with the ground when clearing snow. After many uses, the rubber auger paddles will wear down and will need to be replaced.
Step 1:
Remove the ignition key
Step 2:
Remove all 6 bolts on the auger paddle and then remove the paddle
Step 3:
Install the new auger paddle into the bracket on the auger shaft
Step 4;
Reinstall the mounting bolts
Jack’s Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.
Featured Parts and Products:
- Model: Toro Power Clear 621QZE
- Auger Paddles: #999313
- Toro Snow Blower Parts
- New Toro Snow Blowers
About the Author
Turner Anderson is the Internet Marketing Manager at Jack's and the editor of Jack's DIY Center. You'll also find him creating How-To articles, videos, newsletters, and much more.
Related Posts
How to Adjust the Skid Shoes and Auger Control on Your Cub Cadet Two Stage Snow Thrower →
How to Test and Adjust the Drive Control on Your Cub Cadet Two Stage Snow Thrower →
How to Assemble the Handle and Chute on Your Cub Cadet Two Stage Snow Thrower →
How to Replace the Auger Belt on Your Cub Cadet Two Stage Snow Thrower →
2 Responses to Replacing the Auger Paddles on a Toro Single Stage Snow Blower