Replacing the Auger Paddles on an Ariens Path-Pro Snow Blower
Watch our video on how to replace the auger paddles on an Ariens Path-Pro single stage snow blower.
The auger paddles on a single stage snowblower come in direct contact with the ground when clearing snow. After many uses, the rubber auger paddles will wear down and will need to be replaced.
Step 1:
Disconnect the spark plug and remove the ignition key
Step 2:
Tilt the snow blower back so it rests on it’s support
Step 3:
Remove 6 bolts on each paddle that connects it to the Auger Shaft
To Install:
Step 1:
Insert the paddle into the bracket on the auger shaft
Step 2:
Reinstall all bolts
Jack’s Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.
Featured Parts and Products:
About the Author
Turner Anderson is the Internet Marketing Manager at Jack's and the editor of Jack's DIY Center. You'll also find him creating How-To articles, videos, newsletters, and much more.
Related Posts
How to Install an Ariens Heated Hand Warmer Kit on Your Ariens Snow Blower →
How to Adjust the Traction Drive Clutch on Your Ariens Power Brush →
How to Replace the Attachment Drive Belt on Your Ariens Power Brush →
How to Adjust the Speed Selector on Your Ariens Power Brush →
