Trimmers

Published on June 23rd, 2016 | by Brandon

0

How to Change the Oil of a Honda VersAttach Trimmer

Fuel filters, air filters, spark plugs. These are all elements of power equipment that should be regularly inspected, cleaned, and maintained. Your engine oil is no exception to this. When engine oil gets too old and dirty, it loses the ability to properly protect the engine and its components.

It is often recommended that for small engines, you change your oil after the first 5 hours of operation, and then every 25 hours after that. This will ensure that your engine is appropriately protected and has a high level of performance.

Running the engine without the proper amount of oil can result in engine damage. Be sure to read your owner’s manual for safety procedures, warranty information, and recommended maintenance schedules.

  • Step 1: Make sure that the fuel cap is securely fastened before attempting to change your oil.
  • Step 2: Have a container below the powerhead ready to catch the old oil.
  • Step 3: Remove the cap of the oil filler. Tip the powerhead downward to drain the oil into the container that you have ready.
  • Step 4: Make sure the powerhead is level and begin filling with new oil. Fill until the oil level reaches the bottom edge of the filling hole. It is recommended that you use about 2.7 oz. (0.08 L) for the UMC425 and 3.3 oz. (0.10 L) for the UMC435. Use 4-stroke motor oil that at least meets the API service classification of SJ or later. SAE 10W-30 is generally recommended.
  • Step 5: Reattach and secure the oil filler cap. Be sure to clean up any spills.

You’re done! Remember to maintain a regular schedule of checking and changing your oil to maximize your engine’s performance. Again, check your owner’s manual for specifics and safety procedures.

Related Products and Links

Tags: , ,


About the Author





Leave a Reply

Your email address will not be published. Required fields are marked *

Solve : *
28 + 25 =


Back to Top ↑