How to Change the Oil in a Husqvarna Tiller
Changing the oil in your tiller is a quick and easy to keep your engine running in top condition!
In case you don’t know how to change the oil, here are a few steps to help you out!
Step 1:
Place the tiller on level ground
Step 2:
Clean the area around the oil fill plug
Step 3:
Remove the plug
Step 4:
The oil should be to the point of almost overflowing, check owner’s manual for approximate capacity
Step 5:
To remove the oil, remove the drain plug and tip the tiller forward
Step 6:
After the oil has drained completely replace the oil drain plug and tighten securely
Step 7:
Clean the area around the oil fill and remove the plug carefully-be sure not to let any dirt get into the engine
Step 8:
Using a funnel refill the engine with oil
Step 9:
Recheck the oil level to be sure it has been fueled sufficiently
Step 10:
Re-insert the plug and tighten
Changing the oil is a great way to keep your tiller’s engine healthy!
Be sure to check your owner’s manual to find out what kind of oil you need for your tiller and how often you should be changing it!
Featured Parts:
Jack’s Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.
Related Posts
How to Operate Your Husqvarna 48 Inch Snow Blade →
Husqvarna Fast Tractor: How to Use the Deck Washout Port →
Husqvarna Fast Tractor: How to Replace the Battery →
Husqvarna Fast Tractor: How to Replace the Deck Drive Belt →
