Replacing the Skid Shoes on a Toro Two Stage Snow Blower
Watch our video on how to replace the skid shoes on a Toro two stage snow blower.
The skid shoes slide along the ground to protect the sides of the auger housing from damage. They also allow you to adjust the clearance between the scraper blade and the ground.
Step 1:
Remove ignition key
Step 2:
Lift the auger housing and support with a block of wood so that the skid shoes are off of the ground
Step 3:
Remove the skid shoe bolts
Step 4:
Install new skid shoe on auger housing by re-inserting the bolts
Step 5:
Before tightening the bolts, adjust the skid shoes to the desired height, and then tighten the bolts
Jack’s Safety Tips: Before servicing or repairing any power equipment, disconnect the spark plug and battery cables. Remember to wear appropriate safety glasses and gloves to protect against harmful chemicals and debris. View our Disclaimer.
Featured Parts and Products:
- Model: Toro Power Max 826OE
- Skid Shoes: #106458801
- Toro Snow Blower Parts
- New Toro Snow Blowers
About the Author
Turner Anderson is the Internet Marketing Manager at Jack's and the editor of Jack's DIY Center. You'll also find him creating How-To articles, videos, newsletters, and much more.
Related Posts
How to Adjust the Skid Shoes and Auger Control on Your Cub Cadet Two Stage Snow Thrower →
How to Test and Adjust the Drive Control on Your Cub Cadet Two Stage Snow Thrower →
How to Assemble the Handle and Chute on Your Cub Cadet Two Stage Snow Thrower →
How to Replace the Auger Belt on Your Cub Cadet Two Stage Snow Thrower →
