Car Wash Pump

Equipment Type Pressure Washer
Inlet 1/2" FPT
Outlet 3/8" FPT
PSI 2000
Bore .787" (20mm)
Size 11.4" x 9.2" x 7.2"
Gallons Per Minute 4.0
The preferred pump frame in the car wash self serrvice industry
Forged brass manifold with an exclusive lifetime warranty
Over sized connecting rods for maximum life
Dual Shafts
Heavy duty tapered roller bearing
Solid ceramic plungers with continuously lubricated packings
Unitized stainless steel inlet and discharge valves
Available in "L" left handed version
Stroke: .394" (10mm)
Crankcase Oil Capacity: 33.8 oz.
Maximum Fluid temperature: 165 F
Type Solid Shaft Pump
Weight 30 lbs
Shaft Size 24mm

Equipment Type Pressure Washer
Inlet 1/2" FPT
Outlet 3/8" FPT
PSI 2500
Bore .787" (20mm)
Size 11.4" x 9.2" x 7.2"
Gallons Per Minute 5.0
The preferred pump frame in the car wash self-service industry
dual crankshaft for convenience
Forged brass manifold with an exclusive lifetime warranty
Large capacity, die cast, anodized aluminum oil bath crankcase
Over-sized connecting rods for maximum life
Heavy duty tapered roller bearing
solid ceramic plungers with continuously lubricating packings
Unitized stainless steel inlet and discharge valves
Car Wash Triplex Plunger Pump
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 1250 RPM
Minimum Horsepower Requirements: 5.1 bhp (7.7 hp for gas engines)
Crankcase Capacity: 33.8 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 195 Degrees F.
Lubrication: fill crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change oil after 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Type Solid Shaft Pump
Weight 30 lbs
Shaft Size 24mm

Equipment Type Pressure Washer
Inlet 1/2" FPT
Outlet 3/8" FPT
PSI 3000
Bore .787" (20mm)
Size 12.2" x 9.2" x 6.9"
Gallons Per Minute 5.0
The preferred pump frame in the car wash self serrvice industry
Forged brass manifold with an exclusive lifetime warranty
Large capacity, die cast, anodized aluminum oil bath crankcase
Over sized connecting rods for maximum life
Heavy duty tapered roller bearing
Solid ceramic plungers with continuously lubricated packings
Unitized stainless steel inlet and discharge valves
Available in "L" left handed version
Car Wash Triplex Plunger Pump
Maximum Inlet Pressure: 125 PSI
Maximum Pump Speed: 1250 RPM
Minimum Horsepower Requirements: 8.6 bhp (12.8 hp for gas engines)
Stroke: .630" (16mm)
Crankcase Capacity: 40.6 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 195 Degrees F.
Lubrication: fill the crankcase to dot on oil gauge window per specifications with SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Weight 32 lbs
Shaft Size 24mm

Equipment Type Pressure Washer
Inlet 3/4" FPT
Outlet 3/8" FPT
PSI 1000
Bore 1.18" (30mm)
Size 13.0" x 11.9" x 7.3"
the preferred pump frame in the two (2) gun prep conveyor and tunnel car wash industry
Forged brass manifold with an exclusive lifetime warranty
Large capacity, die cast, anodized aluminum oil bath crankcase
Over sized connecting rods for maximum life
Heavy duty tapered roller bearing
Solid ceramic plungers with continuously lubricated packings
Unitized stainless steel inlet and discharge valves
Available in "L" left handed version
Car Wash Triplex Plunger Pump
Maximum Inlet Pressure: 125 PSI
Minimum Horsepower Requirements: 8.2 bhp (12.3 hp for gasoline engines)
Stroke: .945" (24mm)
Crankcase Capacity: 50.7 oz. Nondetergent SAE 30W oil
Maximum Fluid Temperature: 165 Degrees F.
Lubrication: fill the crankcase to dot on oil gauge window per specifications with Nondetergent SAE 30W oil. Change the oil after a 40 hour break-in period, then every three (3) months or 500 hour intervals thereafter.
Type Solid Shaft Pump
Gallons Per Minute 12
Shaft Size 35mm
Weight 36 lbs